If you have been reading about epitalon and want a single page that covers the useful parts, this is it: definitions, context, how it is studied, and the questions that come up repeatedly.
Updated 2026-06-11. Numbers and descriptions here follow the published literature rather than marketing material.
Identity is normally established by reversed-phase high-performance liquid chromatography combined with mass spectrometry, a pairing that separates components and confirms molecular mass at once. Purity is quoted as a percentage from the chromatogram, and figures above ninety-five percent are a frequent commercial specification. Amino acid analysis or sequencing supplies further confirmation when required. Because many short peptides behave similarly under chromatography, retention time alone does not establish sequence; the mass measurement is what separates one tetrapeptide from another, and certificates should report both.
Short peptides such as AEDG are normally supplied as a freeze-dried solid and are kept dry, cold, and shielded from light. Holding at minus twenty degrees Celsius is common for the long term, while a refrigerator suffices for brief periods before use. The material takes up moisture to some degree, so containers should stay sealed and be allowed to reach room temperature before opening, which limits condensation on the contents. Repeated warming and cooling of a single container is discouraged because it admits water and can lower the amount of intact peptide.
In its supplied form epitalon is a white to off-white powder, usually lyophilized and often hygroscopic. It dissolves readily in water and in aqueous buffers, and it is commonly handled as the acetate or trifluoroacetate salt to improve stability during purification and drying. The amide backbone is labile in aqueous media, so solutions are less durable than the dry solid. Handling notes in the chemical literature therefore emphasize keeping the powder dry, cool and shielded from light until it is dissolved.
Epitalon is a synthetic tetrapeptide whose sequence is alanine-glutamate-aspartate-glycine, written in single-letter code as AEDG. The four residues are joined by three peptide bonds, giving a linear backbone with no branching and no disulfide bridges. Its calculated molecular mass for the free form is approximately 390.3 daltons, a figure that rises when the compound is supplied as an acetate or trifluoroacetate salt. Because the chain is short, the molecule is defined entirely by its residue order rather than by any folded three-dimensional structure.
| Property | Value | Notes |
|---|---|---|
| Sequence | Ala-Glu-Asp-Gly | Written in three-letter amino acid code |
| Single-letter code | AEDG | Form used in most catalogue entries |
| Typical purity specification | 95 percent or higher | Value read from the HPLC chromatogram |
| Storage, dry solid | Minus 20 degrees Celsius, desiccated | Sealed container, protected from light |
| Handling, solution | Divide into single-use portions | Limits losses from freeze-thaw cycling |
Because epitalon has no pharmacopoeial monograph, quality assessment depends on supplier documentation and independent testing. Certificates of analysis typically report a purity figure from a single chromatographic run, a measured mass and sometimes an appearance description, but methods and acceptance criteria are not harmonised across vendors. Third-party laboratories can repeat identity and purity measurements, and mismatches between labelled and measured peptide content have been described for research peptides generally. What constitutes adequate identity confirmation for a molecule of this size stays an open question, since mass agreement alone does not separate closely related sequences.
Identity testing for epitalon relies on reversed-phase high-performance liquid chromatography for purity and mass spectrometry for mass confirmation. Because the sequence contains no tryptophan or tyrosine, ultraviolet detection at 280 nanometres is insensitive, so chromatographic methods usually monitor absorbance near 214 nanometres, where the peptide backbone absorbs. Electrospray ionisation or matrix-assisted laser desorption/ionisation then checks the intact mass against the expected value near 390 daltons. Peptide mapping or amino acid analysis after acid hydrolysis can supplement these measurements, although such confirmatory work is seldom reported on commercial certificates of analysis.
Stability of the tetrapeptide follows ordinary peptide chemistry rather than any unusual structural feature. The aspartate-glycine pair is prone to aspartimide formation under mildly basic or neutral conditions, and deamidation can follow, altering both mass and chromatographic retention. Dry lyophilised powder kept at or below minus twenty degrees Celsius is the usual handling recommendation, with repeated freeze-thaw cycles avoided. Once dissolved in neutral aqueous buffer, degradation proceeds over days to weeks depending on pH and temperature, while acidic conditions generally slow the aspartimide route. A formal stability-indicating study has not been published in the indexed literature.
Several names circulate for the same molecule, including epitalon, epithalone, epithalamin tetrapeptide, and the sequence code AEDG. A CAS registry number, 307297-39-8, is commonly cited for it, though catalogue entries should be checked against supplier documentation because mislabelled records occur. In its usual form the peptide carries free amino and carboxyl termini and is neither glycosylated nor lipidated. Researchers distinguish the defined tetrapeptide from epithalamin itself, a crude pineal preparation containing many peptides that is not chemically characterised.
Material supplied for laboratory use is normally a lyophilised white to off-white powder that dissolves readily in water and in isotonic saline. Lyophilised cakes are hygroscopic and should be equilibrated to room temperature before opening to limit condensation on the solid. Solutions are typically prepared at milligram-per-millilitre concentrations and divided into single-use aliquots, because repeated freeze–thaw cycles degrade short peptides. Aqueous solutions are far less stable than the dry powder, and identity is usually verified by mass spectrometry alongside purity estimation from reversed-phase high-performance liquid chromatography.
Epitalon is a synthetic linear tetrapeptide with the sequence alanine–glutamate–aspartate–glycine, abbreviated AEDG. Its molecular formula is C14H22N4O9 and the calculated mass is approximately 390.35 g/mol. The compound is made by solid-phase peptide synthesis rather than extracted from tissue, although early work described it as a short fragment of a peptide fraction obtained from bovine pineal extract. In the research literature the spelling epitalon and the variant epithalone both appear, while AEDG is the standard code used in peptide nomenclature.
Freeze-dried epitalon is normally kept at minus twenty degrees Celsius in a sealed, desiccated container, protected from light. Short excursions at ambient temperature during shipping are generally tolerated, but repeated warming and cooling cycles encourage moisture uptake, which shortens shelf life. Once dissolved, the peptide is far less stable than the solid: aqueous solutions are subject to hydrolysis and to deamidation at the aspartate and glutamate residues. Working solutions are therefore held refrigerated and used within days, and repeated freezing and thawing of the same vial is best avoided.
Identity and purity are checked by reversed-phase high-performance liquid chromatography, usually with ultraviolet detection near 214 nanometres, where the peptide bond absorbs. Mass spectrometry confirms the expected mass and reveals whether truncation products or adducts are present. Acid hydrolysis followed by amino acid analysis gives the residue ratio, which should approximate one alanine, one glutamate, one aspartate and one glycine. Counter-ions such as acetate or trifluoroacetate remain in the dried product and lower net peptide content, so a stated purity figure on a label does not by itself describe how much peptide a vial holds.
Epitalon is a synthetic tetrapeptide whose sequence is alanine–glutamate–aspartate–glycine, commonly abbreviated AEDG. It was developed in Russia during the 1980s and 1990s by investigators associated with the St. Petersburg Institute of Bioregulation and Gerontology, who studied short peptides as regulators of gene expression and tissue function. The alternative spelling epithalon appears interchangeably in the literature, and the two names refer to the same molecule. Outside Russia it is encountered chiefly as a research chemical rather than a licensed medicine, and it holds no approval from the United States Food and Drug Administration or the European Medicines Agency.
The peptide is a synthetic analogue of epithalamin, a preparation extracted from bovine pineal glands. Investigators sought a short, chemically defined molecule that would reproduce some of the endocrine and gerontological observations attributed to the glandular extract. Proposed mechanisms centre on induction of telomerase activity, an effect reported in cultured human somatic cells in the early 2000s, together with influences on melatonin secretion and neuroendocrine regulation. Those mechanisms remain incompletely characterised, and the reported telomerase response has not been consistently reproduced by independent groups working in comparable systems.
Published work on this compound consists mainly of in vitro experiments, animal studies, and small clinical investigations, a substantial share of which appeared in Russian-language journals. Sample sizes are generally small, control conditions differ between studies, and several endpoints rely on markers whose clinical meaning is itself debated. Reviews of the longevity field treat the peptide as an early example of telomerase-directed research rather than an established intervention. Regulatory treatment varies by country: some jurisdictions place it under prescription controls, others treat it as a laboratory material, and importation may be restricted regardless of local status.
The ADGRG1 protein couples to Gαq/11 protein upon association with the tetraspanins CD9 and CD81. Forced ADGRG1 expression activates NF-kB, PAI-1, and TCF transcriptional response elements. The splicing of ADGRG1 induces tumorigenic responses as a result of activating the transcription of genes, such as COX2, iNOS, and VEGF85. ADGRG1 couples to the Gα12/13 protein and activates RhoA and mammalian target of rapamycin (mTOR) pathway upon ligand binding. Lack of the N-terminal fragment (NTF) of ADGRG1 causes stronger RhoA signaling and β-arrestin accumulation, leading to extensive ubiquitination of the C-terminal fragment (CTF). Finally, ADGRG1 suppresses PKCα activation to regulate angiogenesis.
Most class III adenylyl cyclases are transmembrane proteins with 12 transmembrane segments. The protein is organized with 6 transmembrane segments, then the C1 cytoplasmic domain, then another 6 membrane segments, and then a second cytoplasmic domain called C2. The important parts for function are the N-terminus and the C1 and C2 regions. The C1a and C2a subdomains are homologous and form an intramolecular 'dimer' that forms the active site. In Mycobacterium tuberculosis and many other bacterial cases, the AC-III polypeptide is only half as long, comprising one 6-transmembrane domain followed by a cytoplasmic domain, but two of these form a functional homodimer that resembles the mammalian architecture with two active sites. In non-animal class III ACs, the catalytic cytoplasmic domain is seen associated with other (not necessarily transmembrane) domains. Class III adenylyl cyclase domains can be further divided into four subfamilies, termed class IIIa through IIId. Animal membrane-bound ACs belong to class IIIa.
Calcitonin gene-related peptide 2 (CGRP2), also called calcitonin related polypeptide beta, is a hormone that in humans is encoded by the CALCB gene (previously CALC2). Like the related hormone, calcitonin gene-related peptide 1 (CGRP1), this hormone induces vasodilation (relaxation of blood vessels) through the activation of the CGRP receptor. This form of calcitonin gene-related peptide is traditionally considered to be the primary form used in the enteric nervous system (nervous system in the gut). The gene that encodes CGRP1, CALCA, also encodes the blood-calcium-reducing hormone calcitonin, but despite its name, this protein is encoded by a distinct gene (CALCB). This hormone activates the CGRP receptor, which is a two protein (heterodimer) complex that is composed of RAMP1 and CALCRL.
DNA replication licensing factor MCM6 is a protein that in humans is encoded by the MCM6 gene. MCM6 is one of the highly conserved mini-chromosome maintenance proteins (MCM) that is essential for the initiation of eukaryotic genome replication. The MCM complex consisting of MCM6 (this protein) and MCM2, 4 and 7 possesses DNA helicase activity, and may act as a DNA unwinding enzyme. The hexameric protein complex formed by the MCM proteins is a key component of the pre-replication complex (pre-RC) and may be involved in the formation of replication forks and in the recruitment of other DNA replication related proteins. The phosphorylation of the complex by CDC2 kinase reduces the helicase activity, suggesting a role in the regulation of DNA replication. Mcm 6 has recently been shown to interact strongly Cdt1 at defined residues, by mutating these target residues Wei et al. observed lack of Cdt1 recruitment of Mcm2-7 to the pre-RC.
Oparin was born in Uglich in 1894 into a merchant family. He and his parents soon moved to Kokayevo, a nearby village. Oparin had an older brother, Dmitry, who became an economist. Oparin graduated from the Moscow State University in 1917 and became a professor of biochemistry there in 1927. Many of his early papers were about plant enzymes and their role in metabolism. His first experimental studies were devoted to the chemistry of respiration. In them, he showed that chlorogenic acid is an essential component of redox reactions in the cell. In 1924 he put forward a hypothesis suggesting that life on Earth developed through a gradual chemical evolution of carbon-based molecules in the Earth's primordial soup. In 1935, along with academician Aleksei Bach, he founded the Biochemistry Institute of the Soviet Academy of Sciences. In 1939, Oparin became a Corresponding Member of the Academy, and, in 1946, a full member. In 1937, he organized the Department of Technical Biochemistry at the Moscow Technological Institute of Food Industry. In 1940s and 1950s, Oparin supported the theories of Trofim Lysenko and Olga Lepeshinskaya, who made claims about "the origin of cells from noncellular matter". "Taking the party line" helped advance his career. However, according to cytologist Vladimir Alexandrov:
Sources: en.wikipedia.org
A nuclide is a more general term than isotope, and refers to atoms that have any particular number of protons and neutrons. Stable nuclides are not radioactive and do not spontaneously undergo radioactive decay, so are more usually found in nature. Whereas unstable (i.e. radioactive) nuclides are not found in nature, unless there is a recent source of them, because they are shorter lived, and will spontaneously decay, in one or more steps, to more stable nuclides. For example, carbon-14 is unstable but is found in nature. Scientists use accelerators and nuclear reactors to produce radioactive nuclides. As a general trend, and among other factors, the neutron–proton ratio of a nuclide determines its stability. The value of this ratio for stable nuclides generally increases for larger nuclei with more protons and neutrons. Many unstable nuclides have neutron-proton ratios beyond the zone of stability. The time required to lose half of a quantity of a given nuclide through radioactive decays, the half-life, is a measure of how stable an isotope is. Nuclides can be visually represented on a table (Segré chart or table of nuclides) where the proton number is plotted against the neutron number.
Affinity chromatography can be used in a number of applications, including nucleic acid purification, protein purification from cell free extracts, and purification from blood. By using affinity chromatography, one can separate proteins that bind to a certain fragment from proteins that do not bind that specific fragment. Because this technique of purification relies on the biological properties of the protein needed, it is a useful technique and proteins can be purified many folds in one step.
Patterns of protein expression in levitated cultures resemble the patterns observed in-vivo. For example, as shown in the figure on the right, N-cadherin expression in levitated human glioblastoma (GBM) cells was similar to that seen in human tumor xenografts grown in immunodeficient mice (comparing the left and middle images), while standard 2D culture showed much weaker expression that did not match xenograft distribution (comparing the left and right images). The transmembrane protein N-cadherin is often used as an indicator of in-vivo-like tissue assembly in 3D culturing. Referring to the figure, in the mouse and levitated culture (left and middle image), N-cadherin is clearly concentrated in the membrane, and also present in cytoplasm and cell junctions, whereas the 2D system (right image) shows N-cadherin in the cytoplasm and nucleus, but absent from the membrane.
Apitegromab, sold under the brand name Isembyld, is a fully human IgG4 lambda monoclonal antibody used for the treatment of spinal muscular atrophy. It is a recombinant monoclonal antibody targeting proforms of myostatin. The most common side effects include upper respiratory tract infections, vomiting, cough, other viral infections, headache, gastroenteritis, and pharyngitis (sore throat). Apitegromab was approved for to treat Spinal Muscular Atrophy in the United States in September 2026. Apitegromab is indicated for the treatment of spinal muscular atrophy in people aged two years of age and older who are currently receiving a survival motor neuron 2-targeted treatment.Spinal muscular atrophy is a rare, progressive neuromuscular disease affecting approximately 1 in 10,000 live births and is among the leading genetic causes of infant mortality. It is caused by a faulty survival motor neuron 1 (SMN1) gene that fails to produce a protein essential for motor neuron survival, leading to progressive muscle weakness and wasting.
During barcode sequencing, high molecular weight DNA samples that contain the targeted DNA sequence, ranging from fifty to several hundred kilobases in size, are combined with gel beads containing unique barcodes, enzymes, and sequencing reagents. Microfluidic device can partition input DNA molecules into individual nanoliter-sized droplets of water-in-oil emulsion, called GEMs. Each GEM contains gel beads coated with the same barcode and primers, and a small amount of DNA. The primers are complementary to specific regions of the DNA molecule, allowing for amplification of the DNA in the droplets through PCR. The barcodes enable the identification and grouping of sequencing reads that originate from the same long fragment, which is crucial for downstream analysis.
Sources: en.wikipedia.org
Reversed-phase high-performance liquid chromatography is run alongside mass spectrometry. The chromatogram separates components and gives a purity figure, while the mass spectrum confirms that the measured molecular mass matches the expected sequence. Neither measurement on its own is treated as sufficient.
Long-term holding is usually at minus twenty degrees Celsius in a sealed, desiccated container. A refrigerator is adequate for short intervals before use. Light exposure is normally avoided as well. Allowing a cold container to warm before opening reduces moisture condensation on the contents.
Repeated cycles are generally avoided. Each freeze and thaw can promote aggregation or loss of peptide to container surfaces, which reduces the amount available for later work. Dividing a solution into single-use portions at the outset is the usual way to limit this problem.
The peptide contains four residues in the order alanine, glutamate, aspartate and glycine, abbreviated AEDG. The chain is linear and held together by three peptide bonds. Its calculated mass for the uncharged free form is about 390.3 daltons.